Manufacturer UHP Graphite Electrode 500X2400mm for Arc Furnaces Steel Making

• Customization: Available
• Carbon Content: High-Carbon
• Type: Graphite Electrodes
• Model NO.: 768
• Composition: SiC
• Grade: UHP
• Forming Way: Extruded Graphite
• Crystal Morphology: Flake Graphite
• Transport Package: Container
• Specification: UHP HP RP 75mm-700mm
• Trademark: HebeiBaiyi
• Origin: China
• HS Code: 8545110000
• Production Capacity: 5000ton/Year

Product Description

 

Product Description

 

The graphite electrode is mainly made of petroleum coke and needle coke, and the coal bitumen is used as a binder. Graphite Electrodes has good electrical properties and chemical resistance, which has high mechanical strength at high temperature and good seismic performance.
 

Item		Unit	HP
			≤φ400	≥φ450
Specific resistance	Electrode	µΩ·m	5.2~6.3	5.3~6.5
	Nipple		3.5~4.5
Bending strength	Electrode	MPa	10.5~15
	Nipple		20~26
Elastic modulus	Electrode	GPa	9~12
	Nipple		13~18
Ash content	Electrode	%	0.2
	Nipple
Bulk density	Electrode	g/cm3	1.65~1.72
	Nipple		1.75~1.81
CTE (100-600ºC)	Electrode	10-6/ºC	1.6~1.8
	Nipple		1.3~1.5

Features
The graphite electrode is mainly made of petroleum coke and needle coke, and the coal bitumen is used as a binder. Graphite Electrodes has good electrical properties and chemical resistance, which has high mechanical strength at high temperature and good seismic performance.

Application
It is good conductor of heat and electricity, widely used in electric arc furnace steelmaking, refining furnace, ferroalloy production, industrial silicon, phosphorus corundum and other submerged arc furnace with an electric arc furnace smelting and other high temperature furnace.

 

 

 

ItemUnitGraphite Electr

     

Detailed Photos

 

Skill of using carbon vane:
1, When the new pump is in use, pay more attention to the steering of motor and do not connect with reverse. The pump long time reversal will lead to vanes damaged.
2, The use of pumps environment too much dust, air filtration is not complete will accelerate the wear of the vanes, reduce the life of the vanes.
3, Wet environment will cause the vanes and rotor slot wall corrosion. When air pump start-up parts of the vanes can not be thrown out, the vanes out of uneven stress damage. In such case to check the vanes first and clean up.
4, The use of air pump, frequent switching will increase the number of times the vanes thrown impact, reduce the life of the vanes, should try to avoid.
5, Poor quality vanes will lead to air pump performance or damage to inner wall of the cylinder, should be avoided.

 

How to replace new carbon vanes:
Caron vane is a consumable material,wear to a certain extent will affect the performance of the air pump and eventually damaged. By the time you must replace the new vanes.
1, Before replacing the new vanes, clean rotor slot, air pump cylinder wall, cooling pipe and filter air bag with compressed air.
2, check whether the cylinder wall is worn (too hard material vane will wear the cylinder wall) or not . If the cylinder wall is damaged, the air pump will running noisy and the vane fragile.
3, when installing the vane, note that the direction of the slope of the vane is consistent with the arc of the rotor slot (or that the lower and higher points of the slide width are consistent with the lower and higher points of the rotor slot depth) . If the vane is mounted upside down, the vane will get stuck and break.

vane drawing.png

4.After the vanes is replaced, first unplug the connecting trachea, start the air pump, exhaust the remaining graphite debris and dust in the air pump, then take over the use.

 

Common model for reference:
Chinese Model:
F Model: ZYBW60F,ZYBW80F,ZYBW100F,ZYBW140F,ZYBW250F
E Model:ZYBW60E,ZYBW80E,ZYBW100E,ZYBW140E,ZYBW250E
B Model:ZYBW60B,ZYBW80B,CLFT101DV,ZYBW140B,ZYBW160B;
G Model:ZYBW25G,ZYBW40G,ZYBW60G,ZYBW80G,ZYBW100G,ZYBW140G
Others:ZBW10B,ZYBW25,ZYBW40;TPL8V,TPL16V;VFT40,VFT60,VFT80,VFT100
Germany Model:
KTA50,KTA60,KTA80,KTA100 ,KTA140; DTA140;VTA60,VTA80,VTA100,VTA140,VTA140;DTE3,DTE6,DTE8,DTE10;VLT10,VLT15,VLT25,VLT40,VLT60;DLT10,DLT15,DLT25,DLT40,DLT60; KTA50,KTA60,KTA80,KTA100 ,KTA140; DTA140;VTA60,VTA80,VTA100,VTA140,VTA140; CLFT61DV,CLFT81DV,CLFT101DV, CLFT141DV
DVT2.60,DVT3.60,DVT2.80,DVT3.80,DVT2.100,DVT3.100,DVT2.140,DVT3.140; DVFLT250,TLF260.KVT3.100,KDT3.100,KVT3.80,KDT3.80,KVT-3.60,KDT3.60.VT3.10,VT3.16,VT3.25,VT3.40;DT3.16,DT4.40;VT3.3,VT3.6,VT4.8,VT4.10,VT4.16,VT4.25,VT4.40;
Japanese Model:
KRX-1,KRX-3,KRX-5,KRX-6,KRX-7A, KRA-8,KRA-10,KRA-12;CBX-15,CBX-25,CBX-40,CBX-62

 

Common size for reference:

 

32*16*3	63*43*4	120*40*4	160*29*5	190*38*4	240*40*4
40*24*3	66*39*4	120*40*5	160*37*4	200*29*5	240*48*4
41*18.5*3	85*39*4	130*40*4.8	160*40*5	200*34*4	240*48*5
45*18.5*3	85*47*4	130*45*5	162*50*7	200*36*5	240*55*6
48*24*3.5	95*38*5	130*52*4	170*35.5*4	200*40*4	250*39*4
55*27*3	95*43*4	130*52*5	170*35.5*5	215*52*5	250*42*5
55*39*4	95*47*4	147*48*7	170*39*4	220*88*6	260*52*5
60*31*4	95*59*6	147*58*7	180*40*5	228*73*8	265*45*4
62*31*4	100*52*5	150*27*4	180*55*5	230*40*5	280*87*8
63*34*4	110*29*5	150*38*4	185*55*5	230*47*4	285*62*4
63*36*4	120*27*4	155*38*5	190*27*4	239.5*36*4	355*65*5